LIT-100 Level Indicator Transmitter for FOGRod

Call for Price

Level Indicator Transmitter

Description

Level Indicator Transmitter

The FOGRod hangs in the wastewater and connects to the LIT in the control panel with its 11-core cable. The LIT applies a small voltage to each metal contact on the FOGRod and looks for current flow. When a FOGRod contact is under water, current flows to ground. When a contact is dry, no current flows. It’s like closing a light switch – but in this case wastewater completes the circuit.
The LIT has 10 relays corresponding to the 10 contacts on the FOGRod. Pick the relays you want to use and wire them into your PLC, your pump controller – or even directly into your starters. If you are replacing floats, just unhook the float wires and connect the LIT relays into the same points.

It’s like having 10 floats, but you just pick the ones you want to use.
The LIT also has a 4-20mA output that increases in 1mA steps for each FOGRod contact. So you can replace pressure transducers, ultrasonics and bubblers. If you are replacing floats you can wire the 4-20mA into your telemetry system and get remote level.

Reviews

There are no reviews yet.

Be the first to review “LIT-100 Level Indicator Transmitter for FOGRod”

Go to Top